Is BLR NAS Recovery Tool Perfect For NAS Recovery?

Data recovery from NAS disks could seem important. Nevertheless, BLR NAS recovery tool makes it simple to retrieve lost data. We’ve included the best NAS data recovery software in this post, which can recover any kind of file from any well-known NAS device or server.

You can easily restore data from NAS devices using the BLR NAS recovery tool. For easy NAS data recovery, follow the procedures below.

Step 1: Choose a NAS server and begin the recovery process.

Install BLR Data Recovery Wizard on your 64-bit Windows 11/10 machine after downloading it. Choose “NAS Recovery” when this program opens. Select the NAS device you want to scan by clicking “Scan” once all of the NAS servers are automatically shown.

Step 2: Turn on SSH for the NAS server.

Go to “Control Panel > Terminal & SNMP” and check the box labeled “Enable SSH service.” Click “Next” after seeing and keeping in mind the remote access port to launch the BLR Tools Data Recovery Wizard.

Step 3: Establish a remote connection to the NAS server.

Your IP and port will be automatically detected by this program. Entering the password and user name is all that is required. You may manually fix the IP address or port if it is incorrect. Click “Connect Now” after that.

Step 4: Retrieve missing or erased NAS data

After that, the BLR NAS recovery tool will establish a connection with your NAS and begin scanning it. You will view every file on your NAS server—whether it was deleted, lost, or still exists—after the scan.

The “Filter” function or the “Search files or folders” option may be used to locate the deleted data on the hard drive. Click “Recover” to save the desired NAS files you lost from the server to a different place.

In order to recover deleted NAS files, click the “Recover” button.

On NAS, data loss may happen for a number of causes, including:

1. Absence of power
2. Being too hot
3. Cause a breakdown
4. Erroneous RAID configuration
5. Server registry configuration error
6. By inadvertently, the user deleted it.
7. Controller not working properly

NAS Hard Drive Data Recovery: How to Do It Without Software

To put it simply, you take the disk out of the NAS, plug the hard drive into your computer, and then use data recovery software to save and extract information.

In order to retrieve data, you must:

Step 1: Take the disk out of the NAS. Turn off the power and remove each disk individually.

Crucial
Label the disks you remove from the NAS according to the bay they belong in. You may reassemble them using these markers to ensure consistency. Furthermore, do not void the warranty by removing the NAS drives.

Step 2: Attach the disk to your computer. You may utilize USB-to-SATA adapters in conjunction with power to connect the disk to your PC’s motherboard directly, or you can use SATA cables. You should not “Initialize disks” or “Format” the connected NAS devices when the disks appear on the PC.

Step 3: Make sure you have enough space on an external or internal hard drive or another network storage device (equal to or more than the amount of data recovered from failed NAS disks) to store the NAS restored data.

Step 4: Download BLR NAS recovery tool, a NAS recovery program.

Once these steps are complete, use a PC to use BLR Tools file recovery software to retrieve data from Synology NAS or other NAS services.

What should I do in the event that my NAS data is lost?

• Removing the hard drive from the NAS device without disassembling it might cause harm to the disk and cause further data loss.
• When notified that one or more hard drives have failed, do not reinitialize the storage enclosure.
• Since the NAS rebuild procedure would totally empty the NAS disk, do not begin it before backing up any crucial data
• Verify backups prior to upgrading or changing any NAS software or hardware.
• Hard drives with physical defects (hard drive not recognized, strange sounds from the hard drive, motors not spinning, etc.) should only be powered on a few times.

Can a damaged NAS device’s data be recovered?

Sure. ToolsForge NAS data recovery will assist you in recovering data from damaged NAS disks if your NAS server is built on RAID 0, 1, 5, 6, 10, 01, or 50. All you have to do is set up ToolsForge and link it to your NAS server. Then, after previewing, it will automatically search your NAS disk for lost or deleted data, from which you may recover the ones you choose.

How can you restore data from NAS using ToolsForge?

The quickest way for NAS data recovery is offered by ToolsForge: remote NAS data recovery. It is not necessary to take the hard disks out of the NAS server or disassemble it. Instead, just get ToolsForge on your Mac or PC and install it. Next, enter your NAS server’s IP address, port, username, and password to connect ToolsForge to it. You are now prepared to search for and retrieve deleted NAS files.

My NAS device and ToolsForge NAS data recovery aren’t able to connect. How should I proceed?

• You must have SSH enabled (needed by remote access) and have a username with ROOT permission (required by volume scan) in order to guarantee a successful NAS remote connection. Thus, in the event that the connection drops, you may verify the following:
• Verify that SSH is turned on: Access the NAS device by selecting “Control Panel” > “Terminal& SNMP” > “Terminal” > “Enable SSH service.” Verify that “Enable SSH service” is selected.
• Verify If you have ROOT or administrator access on your Linux system account or NAS device: Consider Synology as an example of a NAS equipment. Go to “Control Panel” > “User and Group,” and adjust the user’s administrator permissions in the relevant menu item. Option names may vary throughout manufacturers; you may check the NAS manufacturer knowledge library. To provide administrator permissions on Linux computers, use the usermod or gpasswd commands.
• After turning on the first two, confirm that the IP, port, username, and password are typed accurately.

It’s taking ages for the NAS server scan to finish. Is this typical?

Yes, that is typical since scanning takes a while on NAS drives because they often have high capacities.

In summary

When you want to share access to files and video across numerous computers, phones, and tablets and your data volume surpasses the capacity of your desktop hard disk storage, Network Attached Storage (NAS) devices are a perfect alternative. Use ToolsForge data recovery tool Pro, a BLR NAS recovery tool, if you lose any vital data while using the NAS. It may help you retrieve data swiftly.