Finally, if the Surface Pro does not turn on, you will be unable to access all of your data stored on it. If your Surface has died, you can read this guide to understand how to retrieve the data. It also provides answers and possible explanations for the Surface Pro not turning on.
Microsoft Surface is a line of touchscreen-equipped computers, tablets, and interactive whiteboards created and marketed by Microsoft. They are intended to be high-end gadgets that serve as test beds for producers of other Windows-compatible goods.
The Surface Pro is possibly the most popular of them all. This tablet is incredibly small and light, and it has all of the hardware and IO connectors that a PC need retrieve data from dead surfaces. It has evolved into a true productivity enhancer in the perspective of many.
However, any gadget, including the Surface Pro, might fail. Some consumers observed that after holding down the power button for approximately 20 seconds. The Surface Pro will not turn on and all of their data will be lost. With the help of this guide, you can retrieve data (Restore Lost Data) from a dead Surface. Because Surface won’t turn on and Surface won’t boot up are two distinct difficulties, you should first decide which Surface Pro issues exist.
When the Surface does not respond to your keyboard’s power button click, it means the screen is dark, blank, and silent. The Surface Pro appears to be out of commission. The problem would be caused by hardware.
When the Surface does not boost up, it means that, despite the fact that the machine has been turned on. And the monitor has illuminated, the operating system has not been loaded, the device is stuck on an unresponsive screen, Windows is displaying the black screen of death, the Surface screen has not appeared, and so on. This type of issue is frequently caused by software.
How to Solve the Problem where Surface won’t turn on
- Solutions for Surface not turning on
If you try to turn on the Surface Pro by pressing the power button. But it is completely unresponsive, several hardware components, including as the charger, cable, battery, peripherals, monitor, and so on, may be the issue. Before moving on to data retrieve from a dead Surface. You can try a few simple troubleshooting steps to solve the Surface Pro that won’t power on.
- Turn off the Surface Pro
The battery on you retrieve data from dead surfaces may drain if you use it for an extended period of time without connecting it. Thus, after inserting your Surface into a wall outlet with its original power supply for at least fifteen minutes, all you have to do is try turning it on again. Check to see if the charging connector’s LED indicator is lit and the connection is secure.
Please keep in mind that if your Surface battery is fully dead, a Surface Dock may be unable to power or charge your tablet. Utilize the authentic power cable provided with your Surface device to replenish its battery.
- Check the charging cord
If the LED light on your Surface does not turn on or flashes white. When attached to a power source, your power cord is most likely broken. Look for a white LED light on the end of the charging cable that attaches to the Surface’s side to see whether it is damaged. When the cable is properly connected to the Surface, the LED lights immediately.
To Activate the Surface, use Keyboard shortcuts
- You can utilize keyboard shortcuts if the Surface Pro does not respond when you press the power button.
- To boot up your Surface with a Type Cover, Touch Cover, or other keyboard attached, press the Windows logo key+Ctrl+Shift+B.
- To turn on your Surface without a keyboard, quickly flick the volume up and down keys three times.
Connected devices may occasionally interfere with the ability of a Surface Book, Laptop, Go, or Pro to power on properly. Then, before turning on your Surface, consider removing all keyboards, mice, and other USB devices.
Disconnect all accessories
Softly reset the Surface Pro.
If the aforementioned remedies fail to resolve the won’t turn on issue, perform a soft reset on the Surface Pro. Soft restarting a computer saves all data, settings, and open applications. As an example:
Press and hold the Power button for approximately ten seconds.
Switch off the electricity.
Attempting to turn on the Surface Pro requires pressing the Power button.
Force the Surface Pro to restart and shut down.
If the Surface Pro isn’t turning on, you can force stop and restart it. Given that different device models necessitate different procedures to force a shutdown and restart, you should first ascertain the model of the Surface Pro.
Regarding the Surface Pro, Surface Pro 2, Surface Pro 3, and Surface Pro 4:
- To turn off the screen, press and hold the device’s Power button for roughly 30 seconds.
- To turn off the screen, press and hold the Power and Volume up buttons for approximately 15 seconds.
- Pause for ten seconds after releasing the buttons. Then, to turn on your Surface, press and hold the Power button.
Surface Pro 5th Generation, Surface Pro 6, Surface Pro 7, and Surface Pro X:
- Press and hold the Power button for around twenty seconds, or until the Surface device restarts.
- When the Windows logo visually appears, depress the Power button.
BitLocker Recovery Tool
Forced restart of the surface
Use local repair services.
If you’ve exhausted all possible repairs and the Surface Pro still won’t turn on, there could be catastrophic hardware damage that’s beyond your capacity to detect and repair.
In that situation, you should take it to a nearby repair shop for expert advice.
If any of the solutions are useful, please share them by using the share button below!
- Techniques for retrieve data from dead surfaces.
- The inability to access any of your data is the most terrifying part of having a dead computer.
- You may feel helpless if your Surface Pro won’t turn on and there isn’t a backup available that contains crucial files.
- However, data can still be retrieved from a non-functional Surface device.
Even if Windows won’t boot or turn on, you can still retrieve data from the Surface with Webbyacad data recovery tool. If the Surface Pro, Surface Book, or Surface laptop crashes, malfunctions, dies, breaks, etc., this tool offers a WinPE boot CD that can be used to restore data.
The precise actions are as follows:
- Download the file to a functional PC.
- Create a USB bootable device with the WinPE version of Webbyacad data recovery tool.
- Insert the bootable USB drive of Webbyacad data recovery into the Surface’s USB port.
- You can change the boot sequence in the UEFI or hit specific keys to make the Surface boot from a USB drive.
- After choosing the Surface drive and Data Recovery module, click Next.
- Wait for the file loss and deletion scan on the Surface drive to finish.
- You can preview the scanned results by right-clicking the object and choosing Preview.
- Check the box next to the items you want to save, then choose retrieve to save them to a different volume or drive.
If BitLocker is used to protect your Surface Pro
Some people might be concerned about whether the data can be retrieve data from dead surfaces in question has a BitLocker-encrypted drive. Yes, is the reply. As long as you have the BitLocker recovery key, you can use Webbyacad data recovery tool for Windows to recover data from the BitLocker drive.
Choose the BitLocker Recovery module provided by Webbyacad data recovery tool to access the Surface Pro drive that won’t turn on after booting from a bootable USB drive. It begins scanning the drive to recover as many deleted and lost files as it can after asking for the BitLocker recovery key to unlock the drive.
You can also take out the internal disk and put it back in another Windows PC that is operational. After that, you can access the data on the drive by using professional data recovery software. To help you through this potentially challenging process, you should enlist the aid of an expert.
Just get Webbyacad data recovery tool for Windows and give it a try!
Read some more blogs:
Recovery Instructions for Dead Seagate External Hard Drive
[…] Instructions for turning on Surface Pro Retrieve Data from Dead Surfaces […]
[…] Retrieve Data from Dead Surfaces […]